Brillion WCC-3620-21

Double tap to zoom

 

Features

  • Two-Section Folding Models in 21’ Working Widths
  • Designed for Improved Trash Flow Through the Machine
  • Three Rows of Shanks of Overall 6″ Spacing
  • Two-Piece Edge Bent S-Tine Shanks for Better Leveling
  • 25″ Under Frame Shank Clearance
  • 18″ Between Shanks, Minimum of 24″ Between Rows
  • 2″ Reversible Points
  • Maximum Shank Operating Depth of 5″
  • Two-Row Coil Tine Harrow in Front of Rear Roller
  • 8″ Roller Axles
  • 61mm Heavy-Duty Bearings
  • Choice of 20″ Notched Ductile Iron Wheels, 24″ Notched Ductile Iron Wheels, 20″ Crowfoot Ductile Iron Wheels or 20″ Optimizer Ductile Iron Wheels
  • Rear Scrapers Standard on Notched Rollers
  • Hitch Floats 10 Degrees Up, 35 Degrees Down
  • Wing Float 5 Degrees Down
  • Hydraulic Down Pressure for Even Machine Weight Distribution Across the Width of Machine
  • Independent Hydraulic Tooth Depth Control
  • Dual Transport Wheels
  • (4) 12.5LX15 F1 Tires
  • Cat. II, III or IV Hitch
  • Transport Height – 13’4″
  • Transport Width – 12’3″
  • LED Warning Lights & SMV Emblem
  • Safety Chain Kit
  • Powder Coat Paint

Specifications

Model WCC-3620-21
Approximate Weight 19,490 lbs. (8,841 kg)
Working Width 21 ft. 0 in. (6.4 m)
Transport Width 12 ft. 3 in. (3.7 m)
Transport Height 13 ft. 4 in. (4.1 m)
Overall Length (Transport) 31 ft. 3 in. (9.5 m)
Road Clearance 13 in. (330 mm)
Type of Pulverizer Wheel - Front 20 in. (500 mm) Crowfoot Ductile Iron
Number of Pulverizer Wheels - Front 42
Type of Pulverizer Wheel - Rear 20 in. (500 mm) Crowfoot Ductile Iron
Number of Pulverizer Wheels - Rear 43
Rear Roller Scrapers N/A
Roller Axle Size 8 in. (203 mm)
Bearing Type 61 mm Heavy-Duty
Type of Shanks Heavy-Duty Two-Piece Edge Bent S-Tine Shank 1.75 in. x 0.625 in. (44.5 x 15.9 mm)
Number of Shanks 42
Nominal Shank Spacing 6 in. (152 mm)
Maximum Shank Depth of Operation 5 in. (127 mm)
Under Frame Clearance 25 in. (635 mm)
Two-Row Coil Tine Harrow Standard
Hitch Pull-Type with Hydraulic Lift
Hitch Category Cat. II, III or IV
Tire Size (4) 12.5L x 15 FI
Hydraulic Circuits Required 3 (+1 for Rear Hitch)
Rear Hitch Optional
Front Roller Scraper Kit N/A
V-Leveler Kit Optional
Hydraulic Down Pressure System Standard
Independent Hydraulic Tooth Control Standard
LED Warning Lights & SMV Emblem Standard
Safety Chain Kit Standard
Powder Coat Paint Standard
Horsepower Requirements 9 to 10 HP (6.7 to 7.5 kW) per ft.
Recommended Operating Speed 6 to 8 MPH (10 to 13 km/h)